Lan Settings Function - Hama N300 Bedienungsanleitung

Note – SSID
► All WLAN devices on which the old SSID is still saved will attempt to log directly
onto your router instead of the repeater, since the router has the old SSID. You
must therefore provide the new SSID to all devices that are to use the WLAN.
► Please also note that older WLAN devices may not recognize SSIDs with special
characters or German umlauts. You should therefore avoid using these characters.
The remaining settings are only intended for expert users. We recommend keeping the default
settings, since these were already configured at the factory to achieve maximum data transfer
rates and compatibility. These settings should therefore only be changed in very special cases.
To save the settings, click Apply. All settings will otherwise be lost. The next window confirms that
the settings have been saved.
Note
► Note that you must restart the repeater at least once in order for altered settings to
be applied.
You can now restart the repeater or make further settings.
• f you wish to restart the repeater, click Apply.
• To make additional settings, click Continue.

7.2.3 LAN settings function:

The LAN settings option contains the settings for automatic assignment of IP addresses. During
normal repeater operation, the DHCP server is deactivated and the IP address is assigned by the
router.
Note – LAN settings
► We recommend leaving the integrated DHCP server deactivated if you wish to use
the device as a repeater. Activating the server is only necessary in very special cases
and should only be carried out by experts.
► Activating two DHCP servers can lead to unforeseeable complications in the
network.
WLAN 300 Mbps Repeater
17