Preparations For Assembly - inshape 17525 Gebrauchsanweisung

To reduce the risk of electric shock, DO NOT:
use extension cords, replace the cord or
plug, place the cord so that it gets trapped
under heavy objects, expose the cord to high
temperatures or use plugs or sockets that are
not in a good condition.
WARNING! The pulse monitor may be
inaccurate. Training too hard may involve a
risk of personal injury or death. If you feel
unwell, stop exercising immediately.
Power source:
Locate the treadmill near to an electrical
socket.
Sudden power surges may cause serious
damage to the treadmill. Weather changes
or switching other appliances on and off can
cause peak voltage, surges or noise voltage.
To limit the risk of damage to the machine,
it should be equipped with fuse protection
against overvoltage (not supplied).
The treadmill has been designed for use with
220 - 240 V rated voltage.
Keep the cord away from the rollers. Do not
leave the cord under the running belt. Do
not use the treadmill if the cord is damaged
or worn.
If the cord is damaged, it must be replaced
by the manufacturer, the service department
or another qualified person to avoid an
accident.
96

Preparations for assembly

Two people are required to assemble the
treadmill.
Lay all the pieces out on the floor and check
that all the parts are there.
You must use the following tools:
• Allen key
• Screwdriver