Preparation; Unpacking The Device; What's In The Box; Inserting The Batteries Into The Remote Control - Medion MD 81210 Bedienungsanleitung

Preparation

Unpacking the device

Remove all packing materials. Also remove the protective film on the TFT screen.
CAUTION!
Do not let children play with the plastic bags of film. There is a risk of asphyxiation!

What's in the box?

When unpacking, check if the following parts are included:
• 1 x portable DVD player with 7" TFT screen
• 1 x 2
nd
monitor with 7" TFT screen
• 1 x AVP connection cable for the 2
• 1 x A/V cable
• 1 x AC/DC adaptor (model no. KSAD1200150W1EU)
• 1 x car adaptor cable
• 2 holders for attaching the monitors to head supports
• 1 x remote control with battery
• 2 x earphones (2 pairs)
• 1 carrying bag to accommodate the complete set
• 1 x instruction manual
• 1 x warranty card

Inserting the batteries into the remote control

Do not expose the remote control to moisture because this could damage it.
A button battery (CR2025) is supplied for the remote. It will already be located in the remote, but it
will be protected for transportation by a protective film. Remove the protective film by pulling it
gently.
12
nd
Monitor (jack connector to jack connector)
Proceed as follows, in order to replace the batteries:
1. Remove the remote control's battery compartment by pressing
the clip in (a).
2. Place the battery in the battery compartment so that the positive
pole (engraved +) is pointing upwards.
3. Insert the remote control's battery compartment again. The clip
must re-engage.
CAUTION!
The enclosed battery must not be recharged, disassembled,
thrown into fire or short-circuited. There is the risk of an explosion
.