Repeat Functions; Repeat - Repeat; Repetition Of A Fixed Section - A-B; Direct Selection - Medion MD 81210 Bedienungsanleitung

Repeat functions

Repeat – REPEAT
The dual use of the number buttons must have been activated previously with the SHIFT button, in
order to be able to use this function.
1. Press the SHIFT button. The SELECT FUNC message will appear in the display. Press the
SHIFT button again, if the SELECT NUM message appears.
2. Press the REPEAT button. The REP: CHAPTER message will appear in the display. The
section to be repeated will appear on the screen each time the button is pressed (the entry will
disappear after a few seconds).
CHAPTER – The chapter is repeated;
DVDs:
TITLE – The title is repeated;
OFF – No repeat function.
REAPEAT – The title is repeated;
CD/VCDs:
REPEAT ALL – The disc is repeated,
OFF – No repeat function.
REPEAT – The current track is repeated;
MP3-CD:
REPEAT DIR – The current directory is repeated;
REPEAT ALL – The disc is repeated
Repetition of a fixed section – A-B
The dual use of the number buttons must have been activated previously with the SHIFT button, in
order to be able to use this function.
1. Press the SHIFT button. The SELECT FUNC message will appear in the display. Press the
SHIFT button again, if the SELECT NUM message appears.
2. Press the A-B button, in order to define the start of a section. The A- message will appear on
the display.
3. Press the A-B button again, to define the end of a section. The A-B message will appear on the
display. The section will be repeated endlessly.
4. Press the A-B button again, to return to normal playback. The A-B CANCEL message will
appear on the display.

Direct selection

Direct title selection– number buttons (audio CD)
You can move to a title on the disc directly with the number buttons. The disc will jump to the
selected title at once.
The number buttons are keys 0–9 on your remote.
1. Press the corresponding number buttons to enter a number between 1 and 9.
2. If your wish to enter a double-digit number press the 10+ key first, then a number key for the
second position.
If the number buttons do not arrive at the channel required or a message appears, the double
occupation SELECT FUNC has been activated.
3. Press the SHIFT button until the NUMBER message appears on the display.
DE
FR
NL
EN
23