Medion MD 81210 Bedienungsanleitung Seite 101

1. Open the Velcro fastenings of the
holder.
2. Place the holder on the head support
horizontally with the upholstery at
the back. The release button and
arrows on the holder must point
upwards at the same time.
3. Lay the upper attachment belt of the
Velcro fastenings across the head
support.
4. Now, pull the lower belt through,
under the head support, and press
the Velcro fastening firmly together
with the upper belt.
5. Also lay the side belt behind the
head support, tighten it and press
the Velcro fastenings together.
6. Push the DVD player/monitor
downwards along the guide rails
from above, until the device clicks
into place.
7. You can now connect the DVD
player and the monitor as described
on page 15 and operate the DVD
player.
Make sure that the holder is attached securely and cannot slip.
DE
FR
NL
EN
19