Electrical Components; Troubleshooting; Alarm Management - Cola TOPFIRE 70 Installations-, Bedienungs- Und Wartungsanleitung

6.3

Electrical components

7 TROUBLESHOOTING

7.1 Alarm management

Alarms are indicated by an acoustic signal (if activated) and a message on the control panel.
In case of an alarm the shutdown procedure is automatically activated. Cancel the signal by pressing button P3 on
the remote control or the emergency panel and wait for the insert to reach OFF status. Eliminate the cause and
restart the insert according to the normal procedure described in this manual. Listed below are the alarms that can
appear on the control panel, with the causes and cures:
TOPFIRE 70
TOPFIRE 80
64
Key:
1- Electronic board L023
2-Safety thermostat
3- Power supply connector
4- Safety microswitch
5- Fume probe
6- Gearmotor
7- Fume extractor
8- Centrifugal fan
9- Air flow meter
10-Control and safety vacuum switch
11-Control panel model L026
TOPFIRE 70 – TOPFIRE 80