Symbols Used In These Instructions; Additional Information; Scope Of Delivery - Oase Bitron C UVC Gebrauchsanleitung

- EN -
• Never carry out technical modifications to the unit.
• Keep the socket and power plug dry.
• If the device is installed directly at the water (< 2 m), ensure that there are no persons in the water while it is operating.
Information about this operating manual
Welcome to OASE Living Water. You made a good choice with the purchase of this product Bitron C.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.

Symbols used in these instructions

Warnings
The warning information is categorised by signal words, which indicate the extent of the hazard.
W A R N I N G
• Indicates a possibly hazardous situation.
• Non-observance may lead to death or serious injuries.
N O T E
Information for the purpose of clarification or for preventing possible damage to assets or to the environment.

Additional information

 A Reference to a figure, e.g. Fig. A.
→ Reference to another section.

Scope of delivery

 A
1 Casing
2 Unit head
3
− Stepped hose adapter, ∅ 19 ... 38 mm (∅ ¾ ... 1½ ")
− Stepped hose adapter for the inlet, ∅ 19 ... 50 mm (∅ ¾ ... 2 ")
4 Flat seal for stepped hose adapters (3)
5 Union nut for fastening the stepped hose adapters (3)
6 Inlet nozzle for driving the cleaning rotor
− Has to be inserted into the inlet for flow rates < 10000 l/h
7 Cover cap 38 mm (1½ ") for closing the outlet
8 Hose clip 20 ... 32 mm
Hose clip 35 ... 50 mm
Hose clip 40 ... 60 mm
16
Bitron C
24W 36W/55W/72W/110W
1 x 1 x
1 x 1 x
3 x 2 x
– 1 x
3 x 3 x
3 x 3 x
1 x 1 x
1 x 1 x
2 x 2 x
2 x 2 x
– 1 x