5.
Maintenance
!
Work on electrical equipment is only to be per-
formed by persons with sufficient knowledge and
experience of electrical systems!
�.1
Cleaning
!
Do not use abrasive cleaning agents and coarse
workshop cloths!
¶
The housing and the LCD are only to be cleaned
using a soft cloth and neutral cleaning agents.
�.2
Spare and wearing parts
Description
Charging lead with PVC insulation
Mains connecting lead
<)
Wearing part
<)
�.�
Disposal
�he BA� �1� is subject to the European
directive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of the BAT 415 prevents
environmental pollution and possible
health hazards.
Robert Bosch GmbH
Order Number
1 684 460 235
>)
1 684 460 236
Maintenance | BA� �1� | 17
6.
Technical data
Properties
Charging current
Charging lead length
*)
Charging lead cross-section
Power consumption
Weight
Characteristic charging curve
Final charge voltage at setting
> 15 °C
Voltage limit for secondary
charging at setting > 15 °C
Final charge voltage at setting
< 15 °C
Voltage limit for secondary
charging at setting < 15 °C
Back up / buffer mode
Function temperature range
Mains voltage / frequency
Mains fuse
Nominal battery voltage
Protection type (DIN 40050)
Class of protection
(DIN 40530)
Dimensions (W x H x D)
Work-related noise emission
value (Lpa)
Interference emission level
The charging leads may not be changed!
*)
en
Value, Range
Max. 15 A
2 m
4.0 mm
2
280 W
approx. 4 kg
IUIaIaI
14.0 V
14.4 V
14.4 V
14.8 V
12.0 V maximum 3 A
13.5 V maximum 15 A
0 °C to 40 °C
230 V, 50/60 Hz
H 250 T 3.15 A
12 V
IP 20
II
260 x 160 x 250 mm
≤
70 dB(A)
DIN 40839 Interference emissi-
on level I
|
1 689 979 943
2012-10-24