Safety; Symbols And Key Words Used; General Safety Notes - KLEIBER KG 740 - LO Betriebsanleitung

2 Safety

2.1 Symbols and Key Words Used

The following symbols and key words are used in the user manual to indicate hazards and instructions. Safety
precautions always appear before an action.
DANGER:
Indicates a potentially dangerous situation. Failure to abide may result in light or minor injury and
damage.
CAUTION:
Indicates a potentially damaging situation. Failure to abide may result in damage to the product or to
anything near the product.
IMPORTANT:
Indicates useful tips and other specifically useful information that allow any dangerous or damaging
situations to be avoided.
REFERENCE TO ENVIRONMENTAL PROTECTION:
Important instructions for protecting the environment.

2.2 General Safety Notes

The KLEIBER 740 - LO pyrometer has been built in accordance with the currently valid standards of the
technology and the recognized safety regulations and ensures the highest safety level.
The fundamental safety and occupational safety requirements of applicable laws, standards, and guidelines
have been taken into account in the pyrometer design. The safety of the pyrometer is confirmed by the decla-
ration of conformity and the CE mark.
All information related to safety is with reference to the regulations of the European Union currently in force. In
other countries, applicable laws, national directives and safety regulations have to be met.
Apart from the safety instructions given in these operating instructions, you should also take into account the
generally valid regulations for accident prevention and environmental protection as well as the regulations of
the respective professional associations and strictly comply with them.
Note the general safety instructions:
• Commissioning of the pyrometer may only be carried out by persons qualified to do so, taking the safety
instructions into account.
• Pay attention to the installation site requirements and notes for commissioning.
• Only use the original cables provided as accessories for the connection of the pyrometer. Other cables,
especially cables manufactured by yourself, are not permitted.
• Lay all cables in such a way that they are not exposed to any tension and are not clamped or squashed.
• Before start-up, carry out a visual inspection for damage to the components of the pyrometer(housing,
optics, cable and pipes). Never operate the pyrometer with damaged components.
KS / KG / KGA 740 - LO
2 Safety
3