Description Of The Monitor - Comelit FT PLANUX 01 Technisches Datenblatt

GROUP S.p.A.
DESCRIPTION OF THE MONITOR
MONITOR SETTINGS AND PROGRAMMING
Using the manual
Setting the language
Programming key
Programming and disabling the Self-ignition key
Programming the Privacy / Doctor key
Renaming headings (Actuator and Camera menus)
Displaying the software version
Entering the Programmer menu
Setting actuator codes
Setting camera codes
Changing the menu language
Resetting the system
1 Audio key. Activates or de-activates conversation with the external unit. The LED flashes to indicate
that a call has been received. The LED illuminates to indicate that a conversation is in progress.
2 Door lock key: Use this key to open the corresponding door lock. The LED flashes to indicate that
a call has been received.
3 Menu key: Use this key to access and exit the menu, and to go back one level in the menu.
4 Confirm key: Confirms the selection made and provides access to the next menu level.
5 Navigation keys: Use these keys to scroll through the headings and modify the value of the
selected heading.
6 Switchboard call key (programmable).
7 Generic actuator key (programmable).
8 Self-ignition key (programmable).
9 Privacy / Doctor function key.
• The Privacy function disables calls from the external unit and switchboard.
• The Doctor function enables automatic activation of the lock-release in response to a call from
the external unit.
The red LED indicates that the selected function is active.
NOTE If, after a key is pressed, it flashes for 4 seconds, this means the function is not available or the
system is busy.
FT PLANUX 01 8
TABLE OF CONTENTS
and

DESCRIPTION OF THE MONITOR

Page 8
Page 9
Page 9
Page 9
Page 10
Page 10
Page 11
Page 11
Page 12
Page 12
Page 13
Page 13
Page 13