Troubleshooting Guide - Kenwood kMix Type HMX75 Bedienungsanleitungen

troubleshooting guide

Problem
Handmixer does
not operate.
Kneader cannot be
fitted to socket.
Handmixer starts
to slow or labour
during processing.
Excessive splashing
or flour spray during
processing.
Unable to remove
tools from sockets.
Cause
No Power.
Fitting kneader to wrong
socket.
Speed selected too low.
Recommended quantity
exceeded.
Recommended 3
minute operating time
exceeded.
Speed selected too high.
Bowl too shallow or too
small for ingredients
being processed.
Speed switch not in "O"
position.
Solution
Check appliance is plugged
in.
Check the fuse/circuit breaker
in your home.
If none of the above see
"service and customer care".
The kneader with the metal
collar e will only fit into the
larger socket.
Insert the kneader - turn and
push until a positive click is
felt.
Increase speed.
Refer to recommended
speed chart for speeds and
quantities to process.
Do not operate for longer
than 3 minutes in any 5
minute period with doughs or
heavy cake mixes.
Select a lower speed initially
and increase as the mixture
thickens.
Select an appropriate sized
mixing bowl.
To remove the tools, make
sure the speed switch is in
the OFF "O" position and
unplug the handmixer.
Press the tool release
button b
6