Incremental Weighing (Fig. A); Troubleshooting - Silvercrest Z30909 Bedienungsanleitung Und Sicherheitshinweise

3. Place the substance to be weighed on the scale. The
weight of the substance being weighed is shown in the
LC display

Incremental weighing (Fig. A)

d 1. Follow steps 1 to 3 of the section on "Weighing" and
e press the TARE button
and the TARE symbol
e. 2. Add another substance to be weighed to the scale. The
e. LC display
p stance.
3. If you remove the added substance from the scale, the
e LC display
4. If you remove all of the substances to be weighed from
the scale, the LC display shows a negative value
p 5. Press the TARE button
ceases to be displayed.
6. Activate the TARE function only within a range of 3–1,000 g.
If there is no substance to be weighed on the scale and if
60 seconds elapses without a button being pressed or no
movement on the scale plate is noted, the scale switches
automatically into the time mode

Troubleshooting

= Fault
g = Cause
c- = Solution
=
= The scale is unstable or not quite plumb.
= Ensure the device is firmly fixed in place and exactly plumb.
66233_silv_Kuechenwaage_Content_LB5.indd 45
Operation / Troubleshooting
.
1
. The LC display
2
appears.
8
shows the weight of the newly added sub-
1
shows 0.
1
once and the TARE symbol
2
.
5
shows 0
1
.
9
8
GB/MT 45
15.06.11 09:48