Product Description; Application; Description Of Unit; Function Leds - Bosch BML 2415 Originalbetriebsanleitung

3.

Product description

�.1

Application

Maintenance-free batteries and standard batteries, as well
as greatly discharged batteries, can be charged with the
BML 2415. You can charge the batteries both when ins-
talled in the vehicle, or when in the dismantled condition.
The planned areas for using the BML 2415 are the
automotive workshop, testing station, gas station and
battery trade.
i
BML 2415 is solely suitable for the charging of
perfect standard and maintenance-free plumbic acid
batteries with nominal capacities of 12 Ah up to a
maximum of 180 Ah and a nominal voltage of 12
Volts and 24 Volts.
�.2

Description of unit

1
2
3
4
5
Fig. 1: BML 2415
1. Display instrument for charge current
2. LED On/Off
3. LED Cutoff voltage reached
4. LED Charging
5. Switch for battery nominal voltage 12 V or 24 V
6. Switch for battery temperature (see 3.2.2)
7. Mains switch On/Off
8. Regulator for restricting the charge current
9. Charging cable with fully insulated terminal clips
Robert Bosch GmbH
6
7
8
9
Product description | B�L 241� | 11
�.2.1

Function LEDs

Symbol Color
Lit red
!
Not lit
!
Flashing red
!
Lit green
Lit yellow
�.2.2

Battery temperature switch function

Symbol Function
Setting for battery temperatures
above 15°C (warm battery)
Setting for battery temperatures
below 15°C (cold battery)
�.� Important information about the
charger
¶
The charger must be placed on a level, firm surface.
¶
The location must be sufficiently stable. Bear in
mind the weight of the device and of the battery that
is to be charged.
¶
Safeguard the charger against moisture and wetness.
¶
Do not cover the charger. Ensure that there is at
least 15 cm free space on all sides of the charger to
allow the air to circulate freely.
en
Function
BML 2415 switched on
BML 2415 switched off
Incorrect polarity!
Check connection!
Cutoff voltage reached
Charging
|
1 689 979 993 2012-10-30