Specifications; Safety Instructions - Makita LS1440 Betriebsanleitung

ENGLISH
1 Handle latch
2 Bolt
3 Blade guard
4 Turn base
5 Kerf board
6 Gear housing
7 Hex nut
8 Adjusting bolt
9 Top surface of turn base
10 Periphery of blade
11 Guide fence
12 Pointer
13 Latch spring
14 Miter scale
15 Grip
16 Switch trigger
17 Socket wrench
18 Shaft lock
19 Blade case

SPECIFICATIONS

Model
Blade diameter ................................................... 355 mm
Hole diameter ...................................25 mm and 25.4 mm
Max. Miter angle ..................................Left 45°, Right 45°
Max. cutting capacities (H x W)
Miter angle
0°
122 mm x 152 mm
–1
No load speed (min ) ............................................ 3,200
Dimensions (L x W x H) .... 530 mm x 596 mm x 610 mm
Net weight ............................................................... 34 kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Explanation of general view
20 Arrow
21 Saw blade
22 Spindle
23 Inner flange
24 Blade
25 Onter flange
26 Hex bolt
27 25.4 mm marking
28 Pin
29 Guide arm
30 Dust nozzle
31 Dust bug
32 Fastener
33 Projection
34 Vise knob
35 Holder
36 Holder assembly
37 Rod 12
LS1440
45° (left and right)
122 mm x 115 mm
38 Horizontal vise
39 Spacer block
40 Aluminum extrusion
41 Wood facing
42 Hole
43 Workpiece
44 There should be no gap
45 Set plate
46 Screw
47 Triangular rule
48 Screws
49 Hex lock nut
50 Arm
51 Limit mark
52 Screwdriver
53 Brush holder cap

SAFETY INSTRUCTIONS

Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury,
including the following. Read all these instruc-
tions before attempting to operate this product
and save these instructions.
For safe operation:
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don't expose power tools to rain. Don't use
power tools in damp or wet locations. Keep work
area well lit. Don't use power tools in presence of
flammable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away
Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tools
When not in use, tools should be stored in dry,
high, or locked-up place, out of the reach of chil-
dren.
6. Don't force tool
It will do the job better and safer at the rate for
which it was intended.
7. Use right tool
Don't force small tools or attachments to do the
job of a heavy duty tool. Don't use tools for pur-
poses not intended; for example, don't use circu-
lar saw for cutting tree limbs or logs.
between the blade, the wood
facing and the workpiece
7