Dual Channel Monitor Function; Button Lock - UCOM Twintalker 6800 Gebrauchsanweisung

UCOM Twintalker 6800 Motorpack

12.14 Dual Channel Monitor function

In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
In power-on mode:
•
•
•
•
•
When no button is pressed within 7 seconds during setting, the
unit will return to stand-by.
To disable the dual channel monitor function:
•
•
•
When the Dual Channel Monitor function is activated, the PMR will switch sequential be-
tween the stand-by channel + CTCSS and the Dual Channel + CTCSS.
When there is activity detected on one of the channels + CTCSS, the active channel is dis-
played for 5 seconds. Within this time, you can answer the message.

12.15 Button Lock

In power-on mode:
•
•
•
36
Press the - button
the display.
Press the - button
channel.
Press the - button
CTCSS - Sub channel setting.
Press the - button
CTCSS.
Press the - button
the stand-by mode.
Press the - button
the display.
Press the - button
displayed.
Press the - button
the stand-by mode.
Press and hold the
button lock mode. The button lock icon is displayed.
The button lock function only affects the
button and the
Press and hold the
LOCK
7 times. The dual-scan icon appears on
or the - button
to confirm the channel selection and go to
or the - button
to confirm your selection and return to
7 times. The dual-scan icon appears on
or the - button
to confirm your selection and return to
- button for 3 seconds to activate the
- button
- button again to deactivate BUTTON
to change the
to change the
until 'OF' is
- button , the
UCOM Twintalker 6800 Motorpack
-