Changing Channels; Ctcss (Continuous Tone Coded Squelch System) - UCOM Twintalker 6800 Gebrauchsanweisung

NOTE!
To check the channel activity, use the monitor function (see chapter 12.8)

12.6 Changing Channels

The PMR has 8 available channels.
To change channels in power-on mode:
•
•
•
•
When no button is pressed within 7 seconds during setting, the unit
will return to stand-by.
IMPORTANT!
Any PMR set on the same channel can receive and listen to the conversation, also when
the other use a CTCSS code (See chapter 13.7).

12.7 CTCSS (Continuous Tone Coded Squelch System)

The 2 digit CTCSS code corresponds to a specific tone frequency the PMR emits. Two users,
with the same channel and CTCSS set can hear one another.They will not be able to hear
anyone else on the channel unless the other radios have the same exact CTCSS code ena-
bled.
The PMR has 38 CTCSS codes available.
In power-on mode:
•
•
•
When no button is pressed within 7 seconds during setting, the
unit will return to stand-by.
IMPORTANT!
Any PMR set on the same channel can receive and listen to the conversation, also when
the other use a CTCSS code (See chapter 13.7).
UCOM Twintalker 6800 Motorpack
Press the - button
on the LCD Screen.
Press the - button
channel.
Press the - button
stand-by mode.
To confirm and shift to the next option, press the
Press the - button
on the display.
Press the - button
code.
Press the - button
stand-by mode.
UCOM Twintalker 6800 Motorpack
once, the current channel number flashes
or the - button
to confirm your selection and return to the
twice. The actual CTCSS code will flash
or the - button
to confirm your selection and return to
to change the
button .
to select another
33