Car Charger Connection; Using The Twintalker 6800; Turning The Unit On/Off; Clock Functions - UCOM Twintalker 6800 Gebrauchsanweisung

11.2 Car charger connection

12 Using the Twintalker 6800

12.1 Turning the Unit ON/OFF

To switch on the device:
• Press and hold the
displayed briefly. After that, the current channel, CTCSS code and time will be displayed.
Additionally some other activated icons are displayed
To switch off the device:
• Press and hold the
displayed briefly. After that, only the time will be displayed.

12.2 Clock functions

When the battery is installed and the unit is OFF, the time is displayed.

12.2.1 Setting the time

In power-off mode:
• Press and hold the
• Press the
• Press
• Press the
• Press and hold the
UCOM Twintalker 6800 Motorpack
• Insert 4 "AAA" rechargeable batteries.
• Plug the small plug of the adapter (7,5 V = /
200mA) into the Twintalker charger connector
and the other end in the electrical socket
(230V ~, 50Hz).
• Plug the small plug of the car charger into the
Twintalker charger connector
• Plug the big plug of the car charger into the 12-
Volt-cigarette charger connector to charge the
unit.
• Don't charge the unit longer than 7 - 10 hours to
avoid batteries gets overcharged.
button for 2 seconds. The unit will "beep" and 'ON' will be
button for 2 seconds. The unit will "beep" and 'OF' will be
button
- button or the
to confirm. The minutes flashes.
- button or the
button
UCOM Twintalker 6800 Motorpack
for 3 seconds. The hour flashes.
- button to change the hour.
- button to change the minutes.
for 3 seconds to confirm the setting
.
31