Call Tones; Sending A Call Tone; Roger Beep On/Off; Key-Tone On/Off - UCOM Twintalker 6800 Gebrauchsanweisung

12.11 Call Tones

A call tone alerts others that you want to talk. 5 different Call Tones can be selected.
12.11.1 Setting the Call Tone
In power-on mode:
•
•
•
When no button is pressed within 7 seconds during setting, the
unit will return to stand-by.

12.11.2 Sending a call Tone

Press the - button
channel.

12.12 Roger Beep On/Off

After the - button
have stopped talking.
In power-on mode:
•
•
•
When no button is pressed within 7 seconds during setting, the
unit will return to stand-by.

12.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.
In power-on mode:
•
•
•
When no button is pressed within 7 seconds during setting, the
unit will return to stand-by.
UCOM Twintalker 6800 Motorpack
Press the - button
Press the - button
call tone or select 'OF' to disable call tones.
Press the - button
the stand-by mode.
briefly. The call tone will be transmitted for 3 seconds on the set
is released, the unit will send out a roger beep to confirm that you
Press the - button
displayed.
Press the - button
disable the Roger-Beep 'OF'.
Press the - button
the stand-by mode.
Press the - button
displayed.
Press the - button
disable the key tone 'OF'.
Press the - button
the stand-by mode.
UCOM Twintalker 6800 Motorpack
4 times. 'CA' will be displayed.
or the - button
to confirm your selection and return to
5 times. The actual roger beep setting is
to enable 'ON' or the
to confirm your selection and return to
6 times. The actual key tone setting is
to enable 'ON' or the
to confirm your selection and return to
to select another
- button to
- button To
35