Mounting The Camera To A Tripod - Sony BVP-9500WSP Bedienungsanleitung

Setting Up the Camera

Mounting the Camera to a Tripod

Mount the camera to a tripod using the optional VCT-
14 Tripod Adaptor.
Caution
• Select an appropriate hole among from holes on the
bottom of the tripod adaptor considering the balance
of the weight of the camera and the tripod adaptor. If
an inappropriate hole is selected, the camera may fall
down.
• Check that the size of the selected hole matches that
of the screw of the tripod. If they do not match, the
tripod adaptor cannot be fixed to the tripod securely.
Mounting procedure
1
1
Attach the tripod adaptor to the tripod, and secure
it with the screw.
2
Place the camera on the tripod adaptor, and slide
forward along the groove on the tripod adaptor
until it clicks.
26(E)
2
VCT-14
Tripod Adaptor
Tripod
Removing the camera from the tripod adaptor
Hold down the red button and pull the lever in the
direction of the arrow.
Red button
If the pin of the tripod adaptor dose not return
to its original position
After removing the camera, if the pin of the tripod
adaptor does not return to its original position, hold
down the red button and move the lever in the
direction of the arrow to return the pin to its original
position. It is not possible to mount a camera with the
pin left out.
Original position
Pin
Lever