Sony BVP-9500WSP Bedienungsanleitung Seite 51

To retrieve scene files
1
Set the cursor to Scene file by turning the MIC 1
LEVEL control, then press the control.
The number or "none" starts blinking.
2
Select the desired scene file number by turning the
MIC 1 LEVEL control.
3
Press the MIC 1 LEVEL control.
The number stops blinking and the corresponding
scene file is retrieved.
To cancel the scene file
Select "none" in Step 2 above.
When you press the MIC 1 LEVEL control, the scene
file is canceled.
To retrieve the standard settings
1
Set the cursor to Standard by turning the MIC 1
LEVEL control.
2
Press the MIC 1 LEVEL control.
The control items returns to the same settings as
those of the reference file, and the message
"Completed" appears.
To execute the Level auto setup
1
Set the cursor to Auto setup by turning the MIC 1
LEVEL control.
2
Press the MIC 1 LEVEL control.
Auto setup begins.
When auto setup is completed, the message
"Completed" appears.
To interrupt auto setup
Press the ENTER/CANCEL switch downward to
CANCEL. The message "Break" is displayed and the
adjustment is canceled.
When the adjustments are completed
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
Shutter Setup display
The Shutter Setup is performed.
* Shutter Setup *
cECS Freq.
: 1/60.0
Super EVS : OFF
1 Adjustment of the shutter speed (ECS frequency) in ECS
mode
2 On/Off of the Super EVS mode
To adjust the shutter speed (ECS frequency)
in ECS mode
1
Set the cursor to ECS Freq. by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the speed by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To turn on/off the Super EVS mode
1
Set the cursor to Super EVS by turning the MIC 1
LEVEL control.
The current status (ON or OFF) starts blinking.
2
Press the MIC 1 LEVEL control.
Each press on the control selects ON or OFF in
turn.
Note
When the camera is in the ECS/Shutter mode, the
Super EVS mode cannot be activated. The ECS/
Shutter mode has the priority.
When the adjustments are completed
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
1
2
19(E)