Sony BVP-9500WSP Bedienungsanleitung Seite 45

VF Setup 2 display
A menu for setting the marks displayed on the
viewfinder screen ON or OFF is displayed.
* VF Setup 2 *
cCenter Marker
Center Marker H
Center Marker V
Safety Zone LVL
Zoom Indicator
Zebra
Zebra mode
Zebra 1 Level
Zebra 1 Width
Zebra 2 Level
1 Turning the center marker ON/OFF
2 Adjusting the horizontal position of the center marker
3 Adjusting the vertical position of the center marker
4 Selecting the size of the safety zone
5 Displaying the zoom indicator
6 Displaying the zebra pattern
7 Selecting the zebra pattern mode
8 Adjusting the bottom level of zebra pattern 1
9 Adjusting the width of zebra pattern 1
0 Adjusting the bottom level of zebra pattern 2
Setting the items
1
Turn the MIC 1 LEVEL control to move the arrow
to the desired item.
2
Push the MIC 1 LEVEL control
Adjusting the horizontal/vertical position of
the center marker
Every time you flip the ENTER/CANCEL switch to
ENTER, LOCK or ADJ is displayed alternately.
The adjusted value is stored in a lens file.
LOCK: The center marker position is locked, and the
position cannot be changed.
ADJ: The horizontal and vertical positions of the
center marker are adjusted with the MIC 1 LEVEL
control.
Displaying the zoom indicator
OFF: A zoom indicator is not displayed.
A: While zooming up, the white line appears from left
to right at the top on the viewfinder screen.
B: While zooming up, the white line appears from the
center to the left and right at the top on the
viewfinder screen.
1
2
:OFF
:LOCK
3
:LOCK
4
:90%
:OFF
5
:OFF
6
:1
7
:75%
:100%
8
:100%
9
0
A
Zoom indicator
Zebra pattern mode
1: Displaying zebra pattern 1
2: Displaying zebra pattern 2
1&2: Displaying zebra patterns 1 and 2
VF Setup 3 display
A menu for setting the functions of the viewfinder
screen is displayed.
* VF Setup 3 *
cMix VF
VF Detail
VF Detail Level :0
VF Y Fix
1 Mixing the return video signal or not
2 Setting the VF detail compensation on the viewfinder ON
or OFF
3 Adjusting the VF detail level on the viewfinder
4 Setting the Y fixing on the viewfinder ON or OFF
Setting the items
Set the items with the same method as for the VF
Setup 2 display.
Note
In a Super Motion operation, VF detail compensation
is not available. The VF signal is fixed to Y.
B
Zoom indicator
:OFF 1
:OFF
2
3
:OFF
4
13(E)