Sony BVP-9500WSP Bedienungsanleitung Seite 48

Display on the Viewfinder Screen
For adjusting the H-phase precisely
1
Turn the MIC 1 LEVEL control to place the cursor
to H Phase Fine, and push the control.
The figure starts blinking.
2
Turn the MIC 1 LEVEL control to adjust the
phase.
3
Push the MIC 1 LEVEL control.
The figure stops blinking and setting is completed.
For adjusting the SC-phase precisely
1
Turn the MIC 1 LEVEL control to place the cursor
to SC Phase, and push the control.
The figure starts blinking.
2
Turn the MIC 1 LEVEL control to adjust the
phase.
3
Push the MIC 1 LEVEL control.
The figure stops blinking and setting is completed.
When the adjustments are completed
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
16(E)
Skin Tone Detail display
The Skin Tone Detail adjustment is performed.
* Skin Tone Detail *
Auto Hue
cLevel : 0
Saturation : 0
Phase : 0
Width : 0
Skin Detail : OFF
Detail Gate : OFF
1 Auto Setup of the skin tone detail hue
2 Adjustment of the skin detail level
3 Adjustment of the skin detail saturation
4 Adjustment of the skin detail phase
5 Adjustment of the skin detail width
6 On/Off of the skin tone detail function
7 On/Off of the skin tone detail gate function
To automatically set up the skin tone detail
hue
1
Set the cursor to Auto Hue by turning the MIC 1
LEVEL control, then press the control.
The gate marker appears on the center of the
viewfinder screen.
2
Operate the camera so that the gate marker
overlaps the color for which the skin tone detail
function is to be activated.
3
Press the MIC 1 LEVEL control.
Auto setup of the skin tone detail hue begins.
When auto setup is completed, the message
"Completed" appears.
To interrupt auto setup
Press the ENTER/CANCEL switch downward to
CANCEL. The message "Break" is displayed and the
adjustment is canceled.
1
2
3
4
5
6
7