Environmental Protection - Ryobi CAG-180M Bedienungsanleitung

GB
F D E
MAINTENANCE
Place the new guard on the shoulder of the bearing
■
cap.
Rotate guard to the correct position. Refer to
■
Positioning the Guard earlier in this manual.
NOTE: Be sure the raised ridge on the guard is seated in
the groove on the bearing cap.
Reassemble disc flange, grinding wheel, and clamp
■
nut. Refer to Installing Grinding Wheel earlier in this
manual.
Tighten the clamp nut securely with the wrench
■
provided.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
as waste.
The machine, accessories and packaging
should be sorted for environmental-
friendly recycling.
I P NL S DK
English
N FIN GR H CZ
13
RUS RO PL SLO HR TR