Control Panel; Bluetooth Connection - Clas Ohlson CUBE 66 BT Bedienungsanleitung

Control Panel

1. [ LINE IN VOLUME ] Line-in volume control
2. [ MIC VOLUME ] Microphone volume control
3. [ TALK OVER ] Microphone volume prioritised in ON mode while AUX/Bluetooth
input is attenuated until the microphone signal is discontinued. Volume then
returns to the preset level. In OFF mode TALK OVER is deactivated.
4. MIC IN (Combo jack): Microphone input (Ø 6.3 mm jack plug with unbalanced
cable/XLR connector with balanced cable)
5. LINE IN: External audio source input (Ø 6.3 mm jack plug with unbalanced cable)
6. LINE IN: External audio source input (RCA)
7. REC OUT (RCA) for optimised recording to an external recording device.
This audio output is independent of the master volume control.
8. [ MASTER VOLUME ] Master volume control, ON/OFF switch
9. [ TONE ] Tone control
10. BATTERY: Internal battery level indicator
11. [ PAIR ] Bluetooth pairing button. Bluetooth LED connection indicator.
12. CHARGING: Charging indicator
13. [ BLUETOOTH VOLUME ] Bluetooth volume control
1
2
3
4
4. Connecting

Bluetooth connection

Please read the instruction manual of the device you wish to connect before beginning.
You may use the device stand on top of the speaker to hold your device.
1. Press [ PAIR ] (11) to activate Bluetooth mode.
2. The Bluetooth indicator (11) will begin flashing quickly and the speaker will go into
search mode (scans for available Bluetooth devices).
3. Activate Bluetooth on the device to be connected.
4. A successful connection is established once the Bluetooth indicator (11) reverts
to a steady and slow flash.
5 6 7
5
9 10
8
13
12
11