Handling Electrical Cables - Dometic FreshJet 1100 Montageanleitung

FreshJet
• Do not use the roof air conditioner near flammable fluids or in closed
rooms.
• Make sure no combustible objects are stored or installed near the air
outlet. A distance of at least 50 cm must be kept.
• Do not reach into air outlets or insert any foreign objects in the device.
A
NOTICE!
• Only use the device as intended.
• The roof air conditioner is not suitable for use in agricultural or con-
struction vehicles.
• Do not make any alterations or conversions to the device.
• Never drive through automatic car washes when the roof air
conditioner is mounted.
• If faults occur in the refrigerant circuit, the system must be checked by
a specialist company and repaired properly. The refrigerant must
never be released into the air.
I
NOTE
• Please ask your vehicle manufacturer if a technical inspection is
required after fitting an air conditioner and whether the height entered
in the vehicle documents needs to be altered:
– FreshJet1100, 1700, 2200: increased height 225 mm
– FreshJet2700, 3200: increased height 248 mm
2.2

Handling electrical cables

!
WARNING!
• The electrical power supply may only be connected by a qualified
electrician (e.g. VDE 0100, Part 721 in Germany).
!
CAUTION!
• Attach and lay the cables so that they cannot be tripped over or
damaged.
A
NOTICE!
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive
materials (metal).
• Do not pull on the cables.
EN
Safety and installation instructions
5