Resume / Delete A Route - KLEIBER KG 315-K USB Betriebsanleitung

6 Recording modes
Route, as selected, will be started. (When the following Route should not executed, it can be easily can-
celed. No further follow Route will be started. Until now saved Routes will be saved.) By pressing the button
SELECT and the selection "Route not done" or by pressing the button COM it will be returned to the last
point of the Route.
Menu Route abort
ProG
Between
ing the button SELECT and the selection "Route abort", the Route will be canceled. The Route is not saved.
Is not started any following Route.By pressing the button SELECT and the selection "Route not abort" or by
pressing the button COM it will be returned to the last selected point of the Route.

6.3.4 Resume / Delete a Route

By pressing the button INIT
or deleted. Thereby are all the characteristics of a Route are defined as at the start, in the same order, are
automatically continuously displayed. Also displayed at first are the following properties:
SEt[
•
tIdE.
•
datE
•
After displaying all the characteristics of the recording follows the permanent display:
pressing the button SELECT the selected Route restarts with the first point. This can always be completed
or aborted, a abort no longer results in the deletion of the recorded Route.
While the menu is displayed following actions are possible:
• With the buttons + and – can at any time change to the next or previous (if any) recording. Showing
properties begins again.
• With the button SELECT can change through the properties of forward and finally the recording to be
started again.
• With the button COM can change through the properties back, and finally the menu completely ended.
20
(Route abort) and
a menu is started from which the already completed Routes can be restarted
recording number from a Route
the time at which the recording was started
the date when the recording was started, depending on the date format
ProG
(Route not abort) can be chosen. By press-
PrFo
. By
KG 315 - K USB