Display Brightness; Date Format - KLEIBER KG 315-K USB Betriebsanleitung

P Peak picker mode: The measured values are computed continuously to an actual maximum value. The
maximum value will be written to the storage by pressing the measuring key to the second step.
A Average mode: The measured values are computed continuously to an actual average value. The aver-
age value will be written in the storage by pressing the measuring key at the second step.
IMPORTANT:
Neither the peak picker nor the average mode compute over all values and rows in storage but only
over the measuring values got during the time the measuring key is pressed at the first step.
5.3.10 Camera number
0001
Display:
The camera number can be selected by pressing + or – . Possible values are 1 to 1000. In mode Ways,
the camera number will be transferred to the PC while data transmission.

5.3.11 Display brightness

05
Display:
The display brightness for seven-segment display can be selected by pressing +
ues between 1 and 15, with 15 delivers the brightest display. The brighter the display, the higher the power
consumption.

5.3.12 Date format

dnY]
Display:
The date format can be selected by pressing + und – . Possible settings are:
dnY. Day.Month.Year
Ynd- Year-Month-Day
ndYI Month/Day/Year
5.3.13 Date output
[All
Display:
The date output can be selected by pressing + and – . Possible settings are:
KG 315 - K USB
Ynd-
or or
tIdE.
or
ndYI
5 Operation
und – . Possible val-
13