D
Schmierung
RUE25-D kann mit Fett (RUE25-D-FE) oder mit Öl (RUE25-D-OE)
geschmiert werden. Schmierung von oben, Seite 24, sonst obere
Nachschmierbohrung durch Anschlusskonstruktion abdecken.
■
Schraube
ggf. lösen und Anschlußteil
■
Schraube festziehen, Anziehdrehmoment beachten,
max. 2,5 Nm.
Lubrication
RUE25-D can be lubricated with grease (RUE25-D-FE) or oil
(RUE25-D-OE). Lubrication from above, page 24, otherwise cover
the upper relubrication hole with the adjacent construction.
■
Loosen the screw
where necessary and pivot
the connector part
.
■
Tighten the screw, observe the tightening torques,
max. 2,5 Nm.
verdrehen.
2
1
max. 2,5 Nm
21