Servicing And Repair; Warranty - Stuart CD162 Handbuch

Servicing and Repair

This product range does not require any routine
servicing.
Note: There are no internal user replaceable
parts.
In the event of product failure it is recommended
that any repair is only undertaken by suitably
qualified personnel. For advice or to receive a
service manual please contact the Technical
Service Department of Cole-Parmer.
Only spare parts supplied by Cole-Parmer or its
agent should be used. Fitting of non-approved
parts may affect the performance of the safety
features of the instrument.
Note: The magnetic stirrer drive utilises
strong magnets.
If in doubt, please contact the Technical Service
Department of
Cole-Parmer Ltd.
Beacon Road,
Stone, Staffordshire,
ST15 0SA, United Kingdom
Tel: +44 (0)1785 812121
Email: cpservice@coleparmer.com
Web: www.stuart-equipment.com
Spares
The following spare parts are available from your
laboratory supplier. For a comprehensive parts
list please contact the Technical Service
Department of Cole-Parmer quoting model and
serial number.
Description
Control knob
Rubber feet, set of 4
Retort rod,
Probe, stainless steel
Probe, PTFE
4
Cat. No.
SD160/DCK
SB160/RF
SR1
CD162/1
CD162/2

Warranty

Cole-Parmer Ltd. warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of three (3) years. In the event of a
justified claim Cole-Parmer will replace any
defective component free of charge.
This warranty does NOT apply if,
1. A ceramic top has broken due to mechanical
impact, scratching, chipping or chemical
etching.
2. Any repair has been made or attempted other
than by Cole-Parmer or its agent.