Memorizing A Sequence (Loop-Function); Programming; Sleep Mode; End Of Operation - Omnitronic CMP-430 Bedienungsanleitung

(3) To precisely select a desired spot to 1 frame (1/75), turn the jog-wheel in pause mode and press the
Play/Pause-button to set the Cue-point. The Cue-indicator shortly flashes twice.

6.8 Memorizing a sequence (Loop-function)

With the Loop-function, you can repeat a programmable sequence
(1) If the Loop-button is pressed in playback mode, the CD keeps running and the A-point (starting-point) is
marked. (Loop-LED flashes). If the Loop-button is pressed once more, the B-point (end-point) of the
sequence is marked (Loop-LED lights permanently). The player repeats the sequence between A-point
and B-point until you press the Loop-button once more (Loop-LED off).
(2) The starting point and the end point of a sequence can be precisely defined to 1 frame. Set the unit into
pause mode and precisely select the A-point (starting-point) via the Jog-wheel. Press the Loop-button
and the selected A-point is marked (Loop-LED flashes).The display shows the selected A-point (e.g.
3:42:22). Now select the B-point (end-point) via the Jog-wheel. The display shows the selected B-point
(e.g. 3:51 11). Press the Loop-button and the selected B-point is marked (Loop-LED lights permanently).
The player repeats the sequence between A-point and B-point until you press the Loop-button once
more (Loop-LED off).

6.9 Programming

CREATE A PROGRAM
(1) Press the Program-button and the Program-LED shines. The display shows "- -" for indicating the track-
number, "00:00" for indicating the track-length and "01" for indicating the program-number.
(2) Press one of the Track-buttons until the display will show the desired track number for the program-
number 1. Press the Program-button in order to save the track.
(3) Press one of the Track-buttons again in order to choose a track for the next program-number. Continue
programming like this until you have no more tracks to program or the maximum of programmable tracks
(20) is reached.
CHECKING A PROGRAM
You can interrupt the programming procedure in order to check the program by pressing the Program-button
once more after you entered a track. Press the Program-button repeatedly and the display will show the
order of programmed tracks. You can edit every program-number and choose a different track.
READ A PROGRAM
(1) After entering your last track, press the Program-button and the last track will be memorized.
(2) Press the Play/Pause-button and the program will be played back. During the program-playback, the
Program-LED is shining.
(3) You can enter the Program-mode at any time in order to add more tracks by pressing the Program-
button.
DELETE A PROGRAM
In order to leave the program mode press the Program-button and hold it for approx. 3 seconds or open the
CD tray or switch the device off. As soon as you deleted the program, the Program-LED is off.

6.10 Sleep mode

If the player mechanism is set to pause for a period exceeding 15 minutes, the unit will automatically step
into sleep mode. The display indicates „SLEEP" and all illuminated buttons and all LEDs are extinguished.
Press Play or Cue, to exit sleep mode.

6.11 End of operation

Before you switch off the device, please make sure that no CD remains in the player. Also make sure that
the CD-tray is completely closed before you switch off. If this is not the case, switch the device on again and
close the tray with the Open/Close-button.
CAUTION: Do not close the tray by pushing it as this could harm the construction. Press the Open/Close-
button again in order to close the tray.
23/46 10602415_V_1_0.DOC