Selecting The Repeat Function; Programming An Individual Title Sequence - Omnitronic XDP-1400MT Bedienungsanleitung

Selecting the repeat function

With the button REPEAT two different repeat
functions can be selected:
• first actuation of the button: continuous repeat of
the selected title (indication "REPEAT 1")
• second actuation of the button: continuous
repeat of all titles of the data carrier (indication
"REPEAT ALL")
• third actuation of the button: return to normal
play
Programming an individual title
sequence
For playing selected titles in a certain order, an
individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by
changing the data carrier or switching the unit off
and on again.
1
In pause mode, press the button PGM on the
player or PROGRAM on the remote control
to activate the programming mode.
• The display indicates "PROGRAM" and the
first memory location number P-01.
2
Use the buttons [

FOLDER/TRACK SEARCH to select the first
title for the title sequence.
• In programming mode, the folder navigation
is deactivated.
• The title name is not indicated.
3
After the title selection, press the button
PGM on the player or PROGRAM on the
remote control to confirm the selection.
• The display will show the second memory
location number P-02.
4
Proceed in the same way for all further titles
until the title
programmed.
5
To start the playback of the title sequence,
press the button [►II].
• The display will show the first memory
location number P-01.
• The title name is not indicated.
6
To add further titles to the title sequence,
follow steps 1 to 5.
7
To delete the title sequence and to continue
normal play, press the button [►II] to switch
to pause mode and keep the button PGM on
the player or PROGRAM on the remote
control pressed
"PROGRAM" will be extinguished.
] and [ ] or the control

sequence has been
until the insertion
36/38 00075259.DOC, Version 1.0