Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed for audio CDs. This sequence will be deleted by ejecting the CD or switching the unit off and on
again. For MP3 CDs this function is not available.
1)
In pause mode, press the button PROG/FLD on the player or PROGRAM on the remote control to
activate the programming mode. The display indicates the first memory location number P-01.
2)
Use the buttons [ ] and [ ] to select the first title for the title sequence.
3)
After the title selection, press the button PROG/FLD or PROGRAM to confirm the selection. The display
will show the second memory location number P-02.
4)
Proceed in the same way for all further titles until the title sequence has been programmed.
5)
To start the playback of the title sequence, press the button [ II]. The display will show P.
6)
To add further titles to the title sequence, follow steps 1 to 5.
7)
To delete the title sequence and to continue normal play, keep the button PROG/FLD or PROGRAM
pressed until the insertion P will be extinguished.
28
Werbung
Inhaltsverzeichnis
