Werbung
MAIN OUT (mono)
Additional (separate) monaural master output. Use to connect
external power amplifiers etc.
MON OUT
Jack Socket output. Use to connect external monitor power
amplifiers or active monitor loudspeakers.
AUX1 Send, AUX2 Send
Jack Socket outputs. Use to connect external effect units (Send)
via the AUX1 / AUX2 master controls.
Stereo Return 1 L&R
Separate mono phone jacks for L/R. Returns signals from
external effect units to Master L&R or MON as per Return 1
control setting.
Stereo Return 2 L&R
Separate mono phone jacks for L/R. Returns signals from
external effect units to Master L&R or MON as per Return 2
control setting.
AMP IN L&R
(Break Jack) Sends signals directly to internal power amplifiers.
Use of these sockets cuts connection to Master outputs.
Stereo Graphic Equalizer
Stereo 9-band equalizer for Master L&R output channels.
Please note, that the Master Graphic equalizer operates in
addition to the channel tone control network. Avoid extreme
settings (V shape) as this will most likely cause a poor overall
performance of your entire PA system.
DIGITAL MULTIEFFECT UNIT
The built-in Digital multieffect unit features 256
different Stereo Effects. These effects are listed
on the top panel printing . Channel signals are
received via the AUX2-EFF controls from the
individual channels.
Overload will be indicated by the EFF PEAK LED.
In this case, the AUX2-EFF Level (Channel) must
be reduced.
Program selection
Programs are selected with the rotary switches
BANK and PROGRAM. You will find 16
programs on each one of the 16 banks.
Loudspeaker sockets (Speakon Type)
The wiring of the 4-pin Speakon loudspeaker sockets is:
1+ =live1- =cold
The power output of the amplifiers is rated at 300+300 Watts
rms at a (minimum) load of 4 ohms.
23
Werbung
