Werbung
TAPE IN (RCA sockets L/R)
Serve as inputs for Tape / CD or other signal sources
with line level.
(Level setting via TAPE IN control)
TAPE OUT (RCA sockets L/R)
Use these outputs for recording of the complete L/R
mixer signal. (Set REC Level via the TAPE OUT
control)
MAIN (Fader)
Additional Master Fader (mono). Output via MAIN OUT jack
socket.
EFF TO MASTER (L/R)
Adds Signals from the digital effect unit to Master L/R mix.
EFF TO MONITOR
Adds Signals from the digital effect unit to the Monitor mix.
Stereo Return 1
Adds Signals from
external effect units via
the RET1 L/R sockets
to the Master L/R mix.
When only one of the
L/R jacks sockets is in use,
both inputs will have the
same signal. (Signal
distribution to L/R via
BAL1 control)
Stereo Return 2
Adds Signals from external effect units via the RET2 L/R sockets
to the Master L/R mix. When only one of the L/R jacks sockets is
used, both inputs will have the same signal. (Signal distribution
to L/R via BAL2 control)
AUX Features
PHONES
Use any dynamic headphone with 1/4" stereo
pone jackplug. Monitor any input channel or
Master by pressing the PFL buttons.
Phones Level
Controls the output level of the headphone
amplifier.
21
Werbung
