Werbung
Power Routing
The POWER ROUTING switches enable the use of the two internal
power amplifiers via the L&R MASTER Faders (NORMAL SETTING)
loudspeakers. In this mode, the selector switches will be set to
‚MON' position and the
internal power amplifiers
will receive signals from
the MONITOR bus via the
MONITOR Fader. Your
main loudspeakers (L&R)
can now be powered by
a separate power
amplifier (for example
BELL PSX or CS series)
which will be connected
to the L-OUT and R-OUT
sockets.
INPUTS / OUTPUTS
MASTER LEFT / RIGHT
Jack socket outputs via the Master Faders R and L. Use to
connect external power amplifiers (BELL PSX or CS), when the
internal power amplifiers are driven in Monitor mode.
22
or the MONITOR Fader.
Master Mode
Connect the main loudspeakers for L&R
(front/foh) with speakon type
connectors to the speaker out sockets
L&R at the rear panel. The selector
switches will be in L&R position. Control
the output volume by the L&R Master
Faders.
Monitor Mode
Enables the use of the internal power
amplifiers to drive your stage monitor
Werbung
