Werbung
Correct GAIN setting:
1. Connect microphone or instrument to channel input socket.
2. Turn TRIM control slowly clockwise and use microphone /
Instrument at normal singing / playing volume.
3. Hold PFL button to monitor channel output on PFL Level
Indicator. A correct setting should read approx. 0dB.
Warning: incorrect TRIM setting may cause
audible distortion or noise.
Channel Equalization
HIGH (+-15dB)
Treble control. ‚0' =flat. Clockwise = maximum,
Counterclockwise = minimum.
MID (+-12dB)
Middle control. ‚0' =flat. Clockwise = maximum,
Counterclockwise = minimum.
LOW (+-15dB)
Bass control. ‚0' =flat. Clockwise = maximum,
Counterclockwise = minimum.
AUX1/MON Send (pre fader)
Sends the channel signal via two separate
masters (AUX1 Send and MON Fader) to the
AUX1/MON outputs. AUX1/MON works 'pre
fader' (independent from the Channel faders)
AUX2/EFF (post fader)
Combined AUX/EFF Control. Sends the channel
signal to the built-in multieffect unit and to the
AUX2 Send socket. AUX2/EFF works post fader
(fades up and down with the channel faders)
PAN (Mono Input Channels 1-6 only)
Determines the position of the signal within the
final stereo mix. Setting PAN fully CCW will send
the signal only to the left mixing bus. Setting
PAN fully CW will send the signal only to the
right mixing bus.
BAL (Stereo Input Channels 7/8 and 9/10)
Determines the level of the L/R input signal
within the final stereo mix. Setting BAL fully CCW
will send the signal only to the left input. Setting
PAN fully CW will send the signal only from the
right input.
19
Werbung
