Preparing For Use; Inserting / Replacing The Battery; Use; Tip For Distance Measurement - Powerfix Profi 298736 Bedienungs- Und Sicherheitshinweise

Preparing for use

Inserting / replacing
the battery
Note: Remove the foil from battery be-
fore inserting into battery compartment
Open the battery compartment
on the back of the product.
Remove the spent battery, if necessary.
Insert a new 9 V block battery into the
battery compartment. Check the po-
larity of the battery during insertion!
Ensure that the band for easy removal
of the battery lies under the 9 V block
battery. Press the battery firmly into
battery compartment.
Close the battery compartment again.
The battery compartment lid locks
noticeably and audibly into place.
Note: When the battery symbol
pears in the display
With a weak battery you may receive an
inaccurate or false measurement result.

Use

Tip for distance
measurement
In order to avoid measuring errors, please
note the following information:
The measurement is performed by ultra-
sound, which travels from the ultrasonic
sender / receiver
The ultrasound is reflected from the target
area and received by the ultrasonic receiver.
, replace the battery.
2
in a conical manner.
16
.
13
13
ap-
GB/IE 37