TomTom LINK 300 Installationsanleitung Seite 17

EN
Closing the TomTom LINK 300
After you have successfully tested the
Closing the
TomTom LINK
300
operation of the TomTom LINK 300 (see
Testing operation on page 13) and connected
it to the TomTom navigation device and
TomTom WEBFLEET (see Connecting to GO
7000 and WEBFLEET on page 16), you can
now close the TomTom LINK 300 with the
plastic seal.
IMPORTANT: Once you have closed the TomTom
LINK 300 with the plastic seal, the device cannot be
opened again without damaging the seal.
For this, slide the plastic seal over the plug of
the power cable into the housing and press
gently until it engages.
18