TomTom LINK 300 Installationsanleitung Seite 15

EN
Connecting to GO 7000 and WEBFLEET
Connect your TomTom GO device to your
Connecting to
GO 7000 and
WEBFLEET
TomTom LINK 300 to fully enjoy the benefits
of Connected Navigation.
When you first switch on your GO device, you
are asked to connect it with the LINK 300
installed in your vehicle. You can do this
immediately or at any time later.
1. Make sure that the LINK 300 is connected
to power and has a GPRS connection (see
TomTom LINK 300 Installation Guide).
2. Switch on your GO device.
3. Tap the screen to bring up the Main Menu.
4. Tap TomTom WORK.
You are asked to start the activation
process. After you have started the
activation process your GO device starts
searching for Bluetooth devices.
If your GO device finds more than one
Bluetooth device, it shows a list of the
available devices. Continue with step 5.
If your GO device finds only one LINK 300,
continue with step 6.
5. Select your TomTom LINK 300 from the
list.
The name starts with LINK followed by the
serial number of your LINK 300 or the
license plate number of your vehicle. You
can find the serial number on the outside of
your LINK 300.
16