NSK Ti-Max nanoSG20LS Bedienungsanleitung Seite 11

7-2 Cleaning (Optic)
Wipe clean the Glass Rod tip with an alcohol-immersed cotton swab. Remove all debris and oil. (Fig. 7)
CAUTION
Do not use a sharp tool to clean the Glass Rod. It could damage the glass and reduce the light
transmission.
7-3 Cleaning (Spray Port)
When the spray port is clogged, or spray does not exit evenly from
the port, clean the port and nozzle as follows:
1) Insert the Cleaning Wire straight into the internal and external
Spray Nozzles. (Fig. 8.9)
2) Insert the Irrigation Tube into each nozzle and rinse the inside
with clean water.
10
Internal Spray Nozzle
Cleaning wire
Cotton Swab
Glass Rod
Fig. 8
Fig. 7
Fig. 9
Fig. 11