Cleaning And Care; Cleaning The Surfaces - GUTMANN EM 22 Bedienungsanleitung

Display
Follow-up
Level 1
Level 2
Level 3
Intensive level
Filter saturation indicatorred LED
LED 1 flashing: Display automatic follow-
up time
(the hood automatically switches down by
one level at a time within a short time until
finally switching off altogether)
LED 2:Fan power level 1 (low motor power)
Press button 2 of remote control once
LED 3: Fan power level 2 (medium motor
power)
Press button 2 of remote control twice
LED 4: Fan power level 3 (high motor power
Press button 2 of remote control three times
LED 5: Intensive level (motor switches back
to level 3 after 3 minutes)
Press button 3 of remote control
LED 6: Display of filter saturation
green LED
green LED
green LED
green LED
green LED
When the red LED lights up the metal filters
must be cleaned (see section on cleaning
and care). The filter saturation indicator
lights up after max. 15 operating hours or
every 14 days (even if no cooking has taken
place).

Cleaning and care

Cleaning the surfaces

Danger due to electric shock! Disconnect
the extractor hood from the power supply by
pulling the plug out of the socket or by
switching the fuse off. When cleaning, make
sure that no water penetrates the device.
Timely cleaning of the surface saves the later
laborious removal
contamination.
Only use conventional detergents or univer-
sal cleaning agents for cleaning suitable for
stainless steel/aluminium and glass. Never
use abrasive cleaning agents or steel wool.
After cleaning the hood, please treat the
stainless steel surfaces with a care product
for stainless steel.
Only clean painted surfaces with soapy water
and a very soft cloth.
Clean the glass front (halogen) with a
conventional glass cleaner and wipe with a
soft cloth.
Cleaning/dismantling the metal
filters
Fire hazard! The performance of the extractor
hood is reduced by grease residues and
the fire hazard increases. In order to prevent
a fire hazard, please make sure to clean the
metal filter regularly (see „Grease filter
cleaning indicator"). Clean the filters every
two weeks at the latest.
Grip the metal filter by the handles with both
hands and pull down until the magnet
contact releases. The metal filter can now
be removed downwards. Installation takes
place in reverse order.
en
of stubborn