Adjusting The Display; Performing Weighing - Seca 761 Bedienungsanleitung

5.1 Adjusting the display

5.2 Performing weighing

To obtain meaningful measured values you must check
before every use that the pointer of the scale reads "0".
1. Ensure that the scale has no load.
2. Check the current position of the pointer.
3. Move the adjusting wheel so that the pointer reads
"0".
– Turn clockwise: Pointer moves counter-
clockwise
– Turn counter-clockwise: Pointer moves
clockwise
CAUTION!
Patients can be injured if they fall
People with restricted mobility may fall when
trying to step on or off the scales.
►
Support people with restricted mobility when
they step on and off the scales.
►
Only use this scale for patients who are able
to stand on their own when being weighed.
1. Make sure that the pointer reads "0".
2. Ask the patient to step onto the scale and keep still.
3. Read off the measured result.
NOTE:
If your scales only display measurement values
in "lbs", you can use the conversion tool on
page 40 to convert measurement values to kg
values.
4. Ask the patient to step off the scale.
English
Weighing • 33