Grundig GDV 100 D Servicehandbuch Seite 61

GDV 100 D
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms the test, pressing PAUSE will
indicate the sound was inaudible or incorrect.
Pressing NEXT will proceed to the next test if the user presses NEXT
without pressing PLAY or PAUSE first, the result of this test will be
FALSE.
Picture Test 1
Service Test Level: VideoColDencOn
The first display test is carried out with a predetermined picture on the
display. The display will show the following message:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms the test, pressing PAUSE will
indicate the picture was invisible or incorrect.
Pressing NEXT will proceed to the next test; if the user presses NEXT
without pressing PLAY or PAUSE first, the result of this test will be
FALSE.
Picture Test 2
Service Test Level: VideoColDsmOn
The second display test is carried out with a predetermined picture on
the display. The display will show the following message:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms the test, pressing PAUSE will
indicate the picture was invisible or incorrect.
Pressing NEXT will proceed to the next test; if the user presses NEXT
without pressing PLAY or PAUSE first, the result of this test will be
FALSE.
Picture Test 3
Service Test Level: VideoSigLsiOn
The third display test is carried out with a predetermined picture on the
display. The display will show the following message:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms the test, pressing PAUSE will
indicate the picture was invisible or incorrect.
Pressing NEXT will proceed to the next test; if the user presses NEXT
without pressing PLAY or PAUSE first, the result of this test will be
FALSE.
2.1.3 Basic Engine
Version Number
In the basic engine tests, the version number of the Basic Engine will
be shown first, as the following example:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing the NEXT key, the Basic Engine tests are started.
Tray Test
First, the tray is tested. The purpose of this test is also to give the user
the possibility to put a disc in the tray of the DVD player. Some tests on
the Basic Engine require that a disc is present in the player. At the end
of the Basic Engine tests this tray test will be repeated solely to enable
the user to remove the disc in the tray. The local display will look as
follows:
SHUFFLE PAUSE SCAN A B
F T S
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY or PAUSE the user can toggle the position of the
tray. The user should close the tray at the end of this test. Note that this
test will not contribute to the test result of the Basic Engine. Pressing
NEXT will proceed to the next test.
GRUNDIG Service
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
Sledge Test (listening test)
The second Basic Engine test tests the sledge; the user can move the
sledge as many times as desired by using PLAY (Level BeSledgeOut)
and PAUSE (Level BeSledgeIn). Pressing NEXT on the local keyboard
proceeds to the next test. Note that this test will not contribute to the test
result of the Basic Engine. The local display will look as follows during
the sledge test:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
Disc Motor Test (visual test)
Service Test Level: BeDiscMotorOn
The third Basic Engine test tests the disc motor; the local display looks
as follows:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms that the disc motor is running;
pressing PAUSE indicates the disc motor does not work. Pressing
NEXT proceeds to the next test. If the user presses NEXT before
pressing PLAY or PAUSE, the result of this test will be FALSE.
Focus Test (listening test)
Service Test Level: BeFocusOn
The fourth Basic Engine test tests the focussing function. The display
will look as follows:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms that focussing was succesful;
pressing PAUSE indicates a focussing failure. Pressing NEXT pro-
ceeds to the next test; if NEXT is pressed before PLAY or PAUSE, the
result of this test will be false.
Radial Test (visual & listening test)
Service Test Level: BeRadialOn
The fifth Basic Engine test tests the radial functionality; the local display
looks as follows:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
By pressing PLAY the user confirms that the radial function works;
pressing PAUSE indicates the function does not work. Pressing NEXT
proceeds to the next test. If the user presses NEXT before pressing
PLAY or PAUSE, the result of this test will be FALSE.
Jump Test (listening test)
Service Test Level: BeGroovesIn, BeGroovesMid and BeGroovesOut
The sixth and last Basic Engine test tests the jumping. During this test,
the local display looks as follows:
SHUFFLE PAUSE SCAN A B
F T S
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
The user can switch between the three different types of groove
settings by pressing PLAY (forward in the list In-Mid-Out) or PAUSE
(backward in the list In-Mid-Out). This is done in a cyclic manner; note
that this test will not contribute to the test result of the Basic Engine.
Pressing NEXT proceeds to the next test.
Tray Test
At the end of the Basic Engine tests, the tray test is repeated. The local
display will look as follows:
F T S SHUFFLE PAUSE SCAN A B
TITLE CHAPTER TRACK
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
This test is meant to give the user the possibility to remove the disc in
the tray. The tray position can be toggled using the PLAY and PAUSE
key. The user must close the tray before proceeding to the next test
with the NEXT key.
Service Test Programme
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
- REPEAT CHAPTER TITLE TRACK
TOTAL REM TRACK TIME
D V D
V C D
- 9 - 10 - 11 - 12 - 13 - 14 - 15 +
3 - 19