Herunterladen Inhalt Inhalt Diese Seite drucken

Bagging The Clippings; Operating The Bag-On-Demand Lever - Toro Recycler 20964 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Bagging the Clippings

Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove
it; refer to
Removing the Side-Discharge Chute (page
13). If the bag-on-demand lever is in the recycling
position, move it to the bagging position; refer to
Operating the Bag-on-Demand Lever (page
Installing the Grass Bag
1.
Raise and hold up the rear deflector
Figure 15
1. Rear deflector
2. Notches (2)
2.
Install the grass bag, ensuring that the pins on
the bag rest in the notches on the handle
15).
3.
Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Grass Bag (page
12).
12).
(Figure
15).
g033379
3. Grass-bag pin (2)
(Figure
Installing the
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure
16).
1. Bag-on-demand lever (in the bagging position)
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening
(Figure
bag-on-demand lever from 1 position to
another.
1. Clean here
12
Figure 16
17) before you move the
Figure 17
g027453
g027454

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis