Dometic TEC40D Bedienungsanleitung Seite 13

TEC40D
The generator has an integrated battery charger for charging the connected battery.
Control elements in the control panel
The control panel is located on the generator behind the cover.
No. in
fig. 2,
Description
page 3
1 Main switch
2 Battery positive terminal
3 Main fuse
4 Battery charger fuse
Control elements in the remote control
The remote control is installed in the vehicle interior.
No. in
fig. 3,
Description
page 4
1 Display
On/Off switch P
2
3 Green button START/STOP
4 Fuel gauge
5 Oil gauge
EN
Switches the generator to standby or no func-
tion.
Connection to the positive battery terminal.
Triggers if overvoltage occurs in the inverter
Triggers if overvoltage occurs in the battery
charger
Shows the status reports.
Switches the control panel on and off if the
main switch is at "I" or "1".
Stops the generator in emergency.
Starts/stops the generator if the control panel
is switched on and the main switch is at "I"
or "1".
Lights up if the diesel fuel goes into reserve.
Lights up if the oil level is too low in the
engine.
Technical description
13