Klarstein Food Locker 650 Bedienungsanleitung Seite 34

EN
34
How to marinate foods
There is a special function in YJS603—the marinate mode, with two options of Quick
Marinate Mode (15mins) and Normal Marinate Mode (27mins). In the marinate mode,
the machine can run two cycles of vacuuming and releasing air to the canister, allowing
foods to get optimum pickle infusion in the least amount of time. Vacuum status keeps for
about 4mins (Quick Marinate Mode)/8mins (Normal Marinate Mode) before releasing
air, between each cycle. When marinate is complete, the machine will beep.
Vacuum canister is a perfect partner to marinating foods. The reason that foods can be
marinated in such a short time is that, it opens the micro-holes of the foods, allowing
pickle infusion very quickly.
Important tips: when using canister for marinating, there should be a knob on the
canister lid. Make sure the canister lid is in "Open" status but NOT "Vacuum" status
when it is in the marinate process.
1. Put items in the canister. Make sure there is no powder or food debris on the
canister lid gasket. Also please allow some space after the items are put into the
canister. And then close the lid.
2. Turn the knob to "Open" position.
3. Connect the hose to the Accessory port on the machine and the port on the canister
lid.
4. Press "Marinate" button, choose the marinate option. Press once for Quick
Marinate Mode, "1" will appear on the digital displayer; press twice for Normal
Marinate Mode, "2" will appear on the digital displayer.
Note: In Quick Marinate Mode, the cycle is about 15 mins. In Normal Marinate
Mode, the cycle is about 27 mins. Longer marinate time will make much perfect
marinated foods.
5. Press "Start" button (or the quick-start button on the handle) slightly press
the canister lid for 3-5s. When it reaches the pressure, the machine will stop
automatically. Value on the Digital displayer will count down from 5 to 1, counting
down cycle repeats continually. After 4mins (Quick Marinate Mode) or 8mins
(Normal Marinate Mode), it stops counting, vacuum status is complete.