walterscheid SW41 Bedienungsanleitung Seite 96

YOKES/CROSSES OF A WIDE ANGLE
8.2 Replace the mandrel with the drift
punch (1).
8.3 Turn the double yoke over.
8.4 Press the pivot pin (1) against the
drift punch (2) and operate the foot
switch simultaneously until you can
remove the first bearing bush.
The second stage for driving out
→
the first bearing bush is ended
when you can remove the bearing
bush.
8.5 Replace the drift punch with the
mandrel.
DISMANTLING/MOUNTING
JOINT
Fig. 34
Fig. 35
Fig. 36
43