walterscheid SW41 Bedienungsanleitung Seite 93

13. Releasing the mounted joint:
for this, press the pivot arm (1)
•
against the mandrel (2) for a short
time and operate the foot switch
simultaneously or
strike on the pivot arm (1) using a
•
hammer.
14. Lubricate the cross kit.
15. Mount the safety device. Observe the
operating manual of the drive shaft for
this.
16. Push the drive shaft halves back into
each other.
DISMANTLING/MOUNTING
YOKE/CROSS
Fig. 27
Fig. 28
40