3.2
Organisational Measures
3.2.1
Obligations of the owner
SAFETY INSTRUCTIONS
The operating manual:
always keep at the usage location of the special tool,
•
must be freely accessible at any time to the operator and
•
maintenance personnel.
The owner is obligated:
to observe the national, generally applicable regulations for
•
occupational health and safety, accident prevention and
environmental protection,
only allow persons to work with/on the special tool who:
•
are familiar with the basic requirements for occupa-
ο
tional health and safety and accident prevention,
have been instructed about working with/on the
ο
special tool,
have read and understood this operating manual.
ο
to keep all warning signs on the special tool in legible
•
condition,
to replace damaged warning signs,
•
to provide the required personal protective equipment,
•
such as e.g.:
safety goggles,
ο
work gloves according to DIN EN 388,
ο
safety footwear,
ο
protective clothing,
ο
barrier cream, etc.
ο
15