Terms Used - walterscheid SW41 Bedienungsanleitung

Position numbers in figures
1.4

Terms Used

The term ...
Third person
Hazard
Manufacturer
Control
USER INFORMATION
Numbers in round brackets refer to position numbers in figures.
The first number refers to the figure and the second number to
the position number in the figure.
Example (Fig. 3/6)
figure 3
•
position 6
•
means ...
... all persons other than the operator.
... the source of a possible injury or harm to health.
... the company GKN WALTERSCHEID GMBH.
... the part which is directly operated by the operator, e.g. by
pressing. A control can be a control lever, rocker switch, button,
rotary switch etc.
7